Razor Wire Concertina (Kontsertina) for Security Fencing

Razor Wire Concertina Type is supplied in coils, made of hot dipped galv. and ss materials. The razor wire blades types vary from Short BTC, Medium BTC to Long blade CTB.

Material types: SS or Galvanized Wire

Common Diameter Range of Razor Wire Concertinas:
400 mm, 500 mm, 600 mm, 750 mm, 900 mm

Common Loops / Spiral Numbers of Razor Wire Concertinas:
Concertina razor wire has a wide range of loops: 30, 39, 55, 54, 56, 61.

Galvanized steel wire materials can be used widely in a variety of environments for a long time service. Razor wire concertina is easy to assemble and install, allowing the repeated use.

Stainless Steel Wire materials can be used in sea areas and moisty environment.

Diameter of the razor wire concertina coils: 450mm, 500 mm, 600 mm, 900 mm.

Blades Types Illustration

Razor Wire Concertina Coils, Galvanized, 56 Spirals, Blade BTC10, BCT12

Technical Specification as follows:
450 mm / 3 clips per cycle, 56 spiral per coil, 6 kg per coil, galvanized, 2.5 mm diameter of coil wire, blade type: Short BTC, length 10m.
900 mm / 5 clips per cycle, 56 spiral per coil, 13 kg per coil, galvanized, 2.5 mm diameter of coil wire, blade type: Medium BTC, length 12m.

Razor Wire Concertina, Coils, Blade BTO30

Technical Specification as follows:
Coil Diameter: 450mm
Recommended Stretch Length: 6-8m
Coil Diameter when Stretch: 400mm
Spiral turn per coil: 54
Clips per Spiral: 3
Blade Size: 30mm
Barb Spacing: 42mm +/- 1
Blade Tickness: 0.5mm Tolerance 0.05
Core wire Diameter: 2.5mm +/- 0.1
Galvaized: 240kg/m2 hot dipped galv.
Tensile Strength: 150kgf/mm2

Galvanized RAZOR WIRE, Blade CBT65

Razor wire CBT-65 - electro galvanized zinc
450mm diameter and 28 rings
Straight length 46.5 m per roll after pull open
Standard covered length 7.5 meter
3.6kg/roll or 5roll/ctn​

Razor Wire, Single Coils and in Spirals Double Coils, Blade Type BTO-22

Razor Edge Wire
Single Coil (Diameter 700mm)
In Continuous Spiral by fastening Two Razor Wire Loops Together with clips (Blade Type BTO-22)

Razor Wire, Triple Coil, Blade Type BTO-22

Razor Edge Wire Triple Coil
Top Coil 980mm, 2 x Bottom Coils 730 mm
Continuous Spiral, fastening Two Razor Wire Loops Together with clips
Blade Type BTO-22

Spiral Razor Wire

Galvanized spiral razor wire is used in natural loops without clips, with following specifications:
Diameter of coil (lying horizontally) - 500 mm.
Steel wire thickness - 2.5 mm.
Blade length - 20 mm.
Blade thickness - 0.5 mm.
Blade width (depth) - 10 mm.
Clear distance between blades - 25 mm.
Number of loops (spirals) / metre - 4.

Flat Razor Wire - Flat Razor Wire Strips

Flat razor wire can be used with various steel fences and barrier.
Featuring less aggressive appearance, non extending length, neat surface.
Flat spiral coils are connected in by fencing staples of galvanized steel.

Razor Wire Accessories

Eye bolt
SS anchor bolt SS 304.
SS eye bolt 304
Double razor wires 750/600 mm diameter.
Razor wire blade: 304 SS.

Ground Locking Pegs - Fittings for Concertina razor wire installation

Made of high tensile wire, cutting from both side of steel wire in sharp pegs, easily put into ground.

Diameter range: 5-8 mm.
4.8-5 mm and 8 mm are popular sizes with our customers.
Ground locking pegs length: 400 mm, 300 mm.
Materials: Hot dip galvanized steel wire, with a 275 g/m2 zinc coating, thermally galv..

Packing

Each coil or roll of razor wire packed in paper cardboard, then wrapped in white color pp woven cloth. 10 coils in a bundle of 4.0kgs & 5coils in bundle of 7.0kgs.