Electrified Concertina Razor Wire Security Fencing

Electrified concertina barbed wire constitutes a physical barrier and includes a detection and deterrence system.
Electrified Concertina wire is composed of a roll of Concertina wire, with a smooth inner electrified coil insulated from the outer roll.

It is compact, easy to transport, and can be readily installed on walls and fences or used in pyramid barriers.

Construction of Electrified Concertina Wire Fencing and Work Principle:
Electrified concertina wire provides additional protection for the perimeters. It is composed of a physical barrier razor wire detection and deterrence system. The electrified concertina barbed wire is simple, compared with ordinary razor wire fencing. It has a smooth inner electrified wire in razor concertina wire insulated from the outer roll. When touching, cutting, destroying razor wire occures, the corresponding alarm device will ring. Thus, the concertina razor wire fence functions as a high security barrier.

Features:

Electrified concertina wire is supplied with high quality and reasonable price;
Easy to install;
Good fencing effect.

Applications:
Electrified concertina wire is suitable for fencing factories, pastures, farming fields, community, railway, high way, sea ports and airports.

Materials:
Stainless steel razor wire.
Galv. zinc-coated razor wire.
Clips for concertina / cross forming.
Tie wire for concertina wire fence installation: Galvanized binding wire.

Install Wire-cutting Barriers Concertina Wire
The need to prevent unauthorized access by unauthorized persons into the territory of protected sites allows for a spiral barrier (SBB) concertina in enterprises of all sectors, both as a main technical means of protection, and in conjunction with electronic means of detection.

The effectiveness and simplicity of mounting the barricades of barbed wire concertina make it possible to erect a secure physical barrier, both the permanent and temporary nature, with minimal cost.

In a residential area practiced method of mounting the barricades on top of the fence, assembly takes place in three stages:

The stipulation concertina towers on the fence, and wire mounting spiral;
Laying in a spiral-formed bracket;
The wire spiral.

Recommendations for installation:
When you install a electrified wire fence, on each pillar (pillar) to install bracket to welding or nails (the distance between the brackets should be 3-4 meters, the height of a fence over a 50 mm diameter of more barricades, the form and method of attachment to the fence bracket according arbitrary Construction of the fence).

Concertina wire stretched the operating position and enshrined in the arm steel wire diameter of 2 mm at two points. When installing the next round of the first cycle of extreme spiral connected with the extreme spiral second spiral steel wire diameter of 2 mm in two diametrically opposite field.

Electrified coil concertina wire, BTO 28

Concertina razor barbed wire coils

Electrified Concertina barbed wire, BTO 65

Concertina barbed wire CBT-65 specification:
Thickness: 0.6 ± 0.05.
Wire diameter: 2.5 ± 0.1.
Barb length: 65 ± 2.
Barb width: 21 ± 1.
Barb spacing: 100 ± 2.
Outside diameter: 450 mm - 500 mm.
No of loops: 33 - 56.
Single coil.