Concertina Wire + Welded Mesh Panel + Y Fence Post = Anti Cut and Anti Climb High Security Fence System

Concertina Wire, is made by galvanized steel plate or stainless steel plate punched into certain forms then attached to the steel wire in sharp angle to form the blades. Sharp blades form a kind of " concertina" by buckles / clips, when used along fencing tops, render a frightening anti climbing effect for the perimeters and borders.

Features of Concertina Razor Wire:
Beautiful appearance;
Economic cost;
Easy installation;
Good frightening result.

Security Fence System of Welded Mesh Panel Topped with Concertina Wire Coils

A typical high security fencing system is composed with finger proof 358 weld mesh panel and anti climbing concertina razor barbed wire tops. The security fencing tops are commonly mounted above Y posts.

Concertina wire coils on Y post for 358 mesh panels security fencing

Fencing system of galvanized steal and stainless steel wire.
Concertina wire coils for fence security installation.
Quality complies with ASTM F-1910.

Technical specification

Posts and pipes
All fence posts and pipes complying with astm a-53 and to be galvanized and pvc after manufacture .

1. all dimensions are in millimeters unless otherwise noted.
2. concrete curing shall be as per aci 3081.1-98.
3. the fence should be constructed 100% as per details in the drawing without any deviation.
4. gates are to be off welded construction. all welding shall be factory welded no site welding is
5. minimum compressive strength of all concrete (used type v sulphate resistant cement) required for fence work shall be 30 n/sqmm (28 day). the concrete in direct contact with soil shall be painted with the coats of bitumin paint as per project specification.

Technical Specification
Posts and Pipes

All fence posts and pipes complying with ASTM A-53 and to be galvanized and pvc after manufacture.

Line Post 3700 88.9 7.62 15.27
Corner & End Post 3700 88.9 7.62 15.27
Brace Strut 3700 60.3 3.91 5.44

All fence fittings to be PVC after manufacture in accordance with ASTM A-53 and A-123

Panel Size: 2.91mm, 2.8mh
Wire Dia: 3mm
Flat Bar: 18 & 15mm
Opening: 76.2 * 12.7 mm
Concertina wire CBT-65, ø2.5mm galvanized core wire
Stainless Steel Blades SS316 600 MM Coil Dia.

All material shall be pvc coated.

Welded Wire Mesh 12.7 * 76.2, Wire ø3mm
Concertina Wire Coil ø600mm
Barbed Wire 3 Roms

Line Post ø89.9mm
Welded Wire Mesh With 3D bend
Cleat Fl 50 * 5 * 200mm
Strut ø60mm @ 3m

Sl No. Category Description High Security Fence
1 Welded Mesh Panel Steel Wire 11 Gauge -0.120" (3.0mm) with PVC coating as ASTM
F2453 - Horizontal
Flat Bar Vertical Reinforcing Bars 15mm wide x 5.0mm thick (±2%) placed at 75mm (±2%) intervals
Mesh Size 76.2mm x 12.70mm
Panel Size 2.80Mtr High x 2.91Mtr Wide
2 Concertina Razor Wire No of Rows 03 Nos
Diameter of Wire 600 mm Diameter (±50mm)
Blade SS - 316 Blades
Turns/Coil Galvanized Core Wire Dia 2.50mm(± 0.2mm), Loops 24 (±1) as per ASTM F1910
3 Barbed wire Nos of Rows 6 Nos
Diameter of Wire 12.5 - 0.098" (2.50mm) Gauge GI Wire according to
ASTM A121 or ASTM A641,Class 111, With 14 gauge, 4
4 Line Post/ Corner Post/ End Post/ Pull Post Pipe Diameter Pipe Dia 88.90mm, SCH. 80  in accordance with ASTM A53.
Wall Thickness SCH. 80 Wall Thickness (7.62mm Thickness)
Post Length 2.70Mtr above ground + 1.0mtr Below + 0.45 Mtr Y crank ( Refer the attached drawing for Crank Specification)
Post Interval 3.0 meter
5 Strut Pipe Diameter Pipe Dia 60.30mm, SCH. 40  in accordance with ASTM A53 at every 3m
Wall Thickness SCH. 40 Wall Thickness (3.91mm Thickness)
Post Length 3.0 meter
6 Hot Dip Galvanizing HDG All steel materials should be Hot Dip Galvanized as per ASTM A123

Concertina Razor Wire Rolls and Coils for Security Fencing Tops

Concertina Razor Edge Wire (Triple Coil)-BTO 22
Height: 1600mm
Length: 70mm
Base Coil Diameter: 73 cm
Top Coil Diameter: 98 cm
Finishing: Hot dip Galvanized
Material: High Tensile Steel
Wire Diameter: 2.5mm
Razor Thickness: 0.5mm
Razor Width: 15mm
Razor Length: 22mm
Razor Distance: 34mm
Requirement: 14 km

Physical measurements techncal specifications razor edge wre(triple coils) type BTO-22

Thickness  0.5+0.05mm
Core wire dia    2.5mm
Barbed length  28mm
Barbed width 15mm
Barb spacing 45+/-1mm
Dia of top coil 98 cm
Dia of base coils 73 cm
Total height  100 cm
Length of coil (Meter) in Pyramid Shape 70 Meter
Weight of coil per Meter  7 Kgs
Core wire material   Hot dipped galvanized steel
Zn coating thickness on blade material 120 gm/m2
Tensile strength of core wire   1500-1600 MPs
Anti-rust ability  Corrosion resistant blades
Loops per Meter 9 Nos. Loops of coils must be ties up with"length limiting wire" for keeping the stretching in limits so that it stretch up to desired length without compromising the specified dia of loops.
Coil jointing The loops will be joined together with clamps in form of triple coils making Pyramid shape with It weight} hexagonal frame at each end of coil. A!"Stretch Limiting" wire will be tied with coil to keep the stretching in desired length.while maintaining the loops dia.

Concertina Razor Wire Coils, BTO-28BTO 28 hot dipped galvanized razor concertina barbed tape wire Triple coils: Base Coil Diameter 730 mm & Top Coil Diameter 980 mm
Coils Jointed in Pyramid Shape.
Type BTO-28
Finish: Hot Dipped Galvanized.

Concertina Razor Barbed Wire, CBT-60Razor blade CBT-60 concertina type razor barbed wireCBT60 Single 7M-8M per coil, 33 loop, Blade Thickness 0.6±0.05mm, material: stainless steel and galv. steel

Galvanized Concertina Razor Wire Coils, BTO-22, HOT DIPPED GALVANISEDConcertina Wire, Razor Blade BTO22, 400mm coils, 54 loops, for welded mesh fence With Loops Dia 600 MM for welded wire mesh fence
Recommended Stretch Length: 6-8m
Coil Diameter when Stretch: 400mm
Spiral turn per coil: 54
Clips per Spiral: 3
Blade Size: 22mm
Barb Spacing: 42mm +/- 1
Blade Tickness: 0.5mm Tolerance 0.05
Core wire Diameter: 2.5mm +/- 0.1
Galvaized: 240kg/m2
Tensile Strength: 150kgf/mm2

Galvanized Razor Wire (Concertina coils), HOT DIPPED GALVANIZED
Hot dipped galvanised iron razor wires with clips, bto-22
size: 450mm x 33 loops x 5.50mtr x 4.0kgs in rolls
size: 700mm x 41 loops x 10.50mtr x 7.0kgs in rolls

Concertina razor wire rolls (24" dia), ASTM A403 Stainless Steel
Razor wire rolls, stainless steel, diameter:900mm x10mtr
SUS fixing wire (DIA.4mm for fitting razor wire)

Concertina Barbed Wire

Barbed wire сoncertina with diameter of 600 mm on five gibs, thickness of wire 2,5 mm

Concertina barbed wire, 600mm diameter, 56 loopsCONCERTINA Razor Barbed wire 60 CM, wire 2.5mm
Diameter of 60 cm (before expansion),
Loop 56 ± 1 nos
Roll lenght: 8,00M, weight 15 kgs
Thickness of core wire ø2,5±0,05 mm Hot Dip Galvanized steel wire (zinc cover 80-120 gr/m2)
Wire Tensile strength, N/mm2 - 1310-1960 N/mm2
In thickness of 0,5±0,05 mm Galvanised Sheet,
Tensile Strenght of min. 1500 MPa (Galvanized– 140-270 gr/m2)
Amount of clips on two coils - 5


Chemical Specifications

Mechanical/ Physical properties:
Corrosion resisting
Hot dipped galvanized
Core wire: Zn coated 8-10 μm, core wire tensile strength (MPa): 1500-1600;
Core wire hardness(HV): max. 410
Razor hardness(HV): max. 116

CBT and BTO Concertina Wire Specification Table
Concertina Barbed Tape and Barbed Tape Obstacle: Blade and Core

Model Blade Thickness Core Wire Diameter Blade Length Blade Width Blade Space
BTO-10 0.5±0.05mm 2.5±0.1mm 12±1mm 13mm 26mm
BTO-12 0.5±0.05mm 2.5±0.1mm 12±1mm 15mm 26mm
BTO-18 0.5±0.05mm 2.5±0.1mm 18±1mm 15mm 33mm
BTO-22 0.5±0.05mm 2.5±0.1mm 22±1mm 15mm 34mm
BTO-28 0.5±0.05mm 2.5±0.1mm 28±1mm 15mm 34mm
BTO-30 0.5±0.05mm 2.5±0.1mm 30±1mm 18mm 34mm
CBT-60 0.6±0.05mm 2.5±0.1mm 60±1mm 32mm 96mm
CBT-65 0.6±0.05mm 2.5±0.1mm 65±1mm 21mm 100mm

Concertina Wire Coils: Sizes, Loops, Extended Length

Razor Type Outside Diameter No. of Loops Standard Length per Coil Notes
CBT-60, 65 450mm 33 7M-8M Single Coil
CBT-60, 65 500mm 56 12M-13M Single Coil
CBT-60, 65 700mm 56 13M-14M Single Coil
CBT-60, 65 960mm 56 14M-15M Single Coil
BTO-10, 12, 18, 22, 28, 30 450mm 56 8M-9M (3clips) Cross Type
BTO-10, 12, 18, 22, 28, 30 500mm 56 9M-10M (3clips) Cross Type
BTO-10, 12, 18, 22, 28, 30 600mm 56 10M-11M (3clips) Cross Type
BTO-10, 12, 18, 22, 28, 30 600mm 56 8M-10M (5clips) Cross Type
BTO-10, 12, 18, 22, 28, 30 700mm 56 10M-12M (5clips) Cross Type
BTO-10, 12, 18, 22, 28, 30 800mm 56 11M-13M (5clips) Cross Type
BTO-10, 12, 18, 22, 28, 30 900mm 56 12M-14M (5clips) Cross Type
BTO-10, 12, 18, 22, 28, 30 960mm 56 13M-15M (5clips) Cross Type
BTO-10, 12, 18, 22, 28, 30 980mm 56 14M-16M (5clips) Cross Type

ADD: No. 112 Dong Fang Hong Road,Dezhou City, Shandong Province.

TEL: +86-534-2650118-609   FAX: +86-534-2650118-900

© KDY Concertina Razor Wire Factory