Anti-Climb Mesh Fencing with Crossed Blade Razor Wire for Prisons, Military and National Security

Cross razor wire is popularly used in military field, prisons, detention houses, government buildings, and other national security facilities.

Anti-climbing prison fence is made with metal fence panels and sharp blade razor wire toppings. The razor wire can also work as climb resisting fence by itself. Processed from hot dipped galvanized steel sheet into hot dipped steel strips and wires. Then cut the steel strips to razor shape. Press the wires and strips together to form the razor wire mesh fence. Long blade concertina razor wire CBT-65 is used with thin opening mesh sheets, also CCTV device, for prison security and other government facilities.

Fencing Mesh Fabric: Heavy galvanized welded mesh made from galvanized steel wire.
Tension wire: heavy galvanized wire 3.76 mm dia, sufficient for 3 rows.
Barbed wire: 2 Ply, 4 Points. galvanized strand wire 2.50 mm dia, galvanized barbing wire 2.0 mm dia, spacing between barbs 101 mm, in reels of 200 m, sufficient for 6 rows.
Razor Wire: CBT-65, hot dipped galvanized zinc coated wire, thickness: 0.50 mm +/- 0.05 mm.
Wire diameter: 2.50 mm +/- 0.05 mm, barb length: 65 mm +/- 1 mm, barb spacing: 100 mm +/- 2 mm, 450 mm loop diameter and 35 loops, Straight length: 46.5 m per roll after pull open.
Standard covered length: 10 m after extending.
Line posts: 73.0 mm OD × 5.16 mm wall thickness × 3.60 m long galvanized steel post with galvanized 'V' shaped extension arm on top to take 6 rows of barbed wire, spacing at 3.0 m intervals.
Pull post: 114 mm od × 6.02 mm wall thickness × 3.60 m long Galvanized post with 42.2 mm OD × 3.56 mm wall thickness × 6.0 m long Galvanized steel brace rail pipe, Galvanized 'V' shaped extension arm to take 6 rows of barbed wire. Pull Post supplied with standard Galvanized straining fittings like truss rod, turn buckle, tension bar, bands, spacing at 152 m intervals.
Corner post: Same as item no. 5 above, but with corner extension arm.
End post: Same as item no. 5 above, but with only half the fittings.
Bottom rail: 42.2 mm OD × 3.56 mm wall thickness × 6.0 m long Galvanized steel Bottom Rail Pipe with galvanized steel clamps to connect the pipes together.